Motorola WS5100 Series Reference Manual page 105

6. Click the Global Settings
on the system. Remember, changes made to any one value impact each WLAN.
Click OK to save updates to the Global WLAN Settings screen. Click
revert back to the previous screen. Checkbox options within the Global Settings screen include:
MU Proxy ARP Enables Proxy ARP handling for MUs. Proxy ARP is provided for MU's in PSP mode
handling whose IP address is known. The WLAN generates an ARP reply on behalf of a MU,
if the MU's IP address is known. The ARP reply contains the MAC address of the
MU (not the MAC address of WLAN Module). Thus, the MU does not awaken to
send ARP replies (helping to increase battery life and conserve bandwidth). If an
MU goes into PSP mode without transmitting at least one packet, its Proxy ARP
will not work for the MU. This option is selected by deafult.
Shared-Key Enables Shared-Key Authentication for all enabled WLANs on the system. This
Authentication option is selected by default.
Manual mapping of Use this option (its selected by default) for custom WLAN to Radio mappings.
WLANs When Advanced Configuration is disabled, the user cannot conduct Radio –
WLAN mapping. Additionally, the user cannot enable WLANs with an index from
17 to 32. Once the Advanced Configuration option is enabled, the following
conditions must be satisfied (to successfully disable it). No WLANs with index 17
to 32 should be enabled. Additionally, the Radio – WLAN mapping should conform
to the following:
BSS ID 1 – Possible WLANs 1,5,9,13
BSS ID 2 – Possible WLANs 2,6,10,14
BSS ID 3 – Possible WLANs 3,7,11,15
BSS ID 4 – Possible WLANs 4, 8, 12,16
Enable WLAN Select this option to enable WLAN bandwidth settings. WLAN bandwidth settings
Bandwidth Settings ensures quality of service for applications regardless of network load. This option
is selected by default.
button to display a screen with WLAN settings applying to the all the WLANs
Network Setup
Cancel to disregard changes and
4-23