Motorola WS5100 Series Reference Manual page 343

To define the Radius authentication and accounting configuration:
1. Select Security > Radius Server
2. Select the Authentication
3. Refer to the Authentication
EAP and Auth Type Specify the EAP type for the Radius server.
• PEAP
is an ideal choice for networks using legacy EAP authentication methods.
• TTLS
is not performed until after a secure transport tunnel has been established. This
allows EAP-TTLS to protect legacy authentication methods used by some
Radius servers.
Auth Data Source Use
Radius server.
• If
source for user authentication. Refer to the
user and group permissions for the switch's local Radius server.
• If
from the main menu.
tab.
field to define the following Radius authentication information:
uses a TLS layer on top of EAP as a carrier for other EAP modules. PEAP
is similar to EAP-TLS, but the client authentication portion of the protocol
Auth Data Source drop-down menu to select the data source for the local
Local is selected, the switch's internal user database serves as the data
LDAP is selected, the switch uses the data within an LDAP server.
Switch Security
Users and Groups tabs to define
6-73