Motorola WS5100 Series Reference Manual page 168

4-86 WS5100 Series Switch System Reference Guide
settings as well as a set of advanced properties in case its transmit and receive capabilities need to be
adjusted.
NOTE: The screen display can vary slightly depending on whether the access port radio is
an 802.11a or 802.11bg model.
To edit a radio's configuration:
1. Select Network
2. Click the Configuration
3. Select a radio to edit from the table.
4. Click the Edit
5. In the Radio Descr.
describe radios of the same type and can be used to locate a radio if there are any problems.
6. Select the Dedicate this Radio as Detector option
APs on the network.
Setting this radio as a detector dedicates the radio to detect rogue APs on the network. Dedicated
detectors do not connect to clients.
7. Select the Single-channel scan for Unapproved APs
devices using the radio's current channel of operation.
> Access Port Radios
tab.
button to display a screen containing settings for the selected radio.
field, enter a brief description to differentiate the radio. The description is used to
from the main menu tree.
to use this radio as a detector port to identify rogue
checkbox to enable the switch to scan for rogue