Editing The Details Of An Existing Vlan - Motorola WS5100 Series Reference Manual

4.3.1 Editing the Details of an Existing VLAN

To revise the configuration of an existing VLAN:
1. Select Network
2. Select an Ethernet for which you want to configure the VLAN and click on the
The system prompts you with a
disruptions could occur with the switch.
3. Click OK to continue.
4. Use the Edit screen to modify the VLAN's mode, access VLAN and allowed VLAN designation.
5. Use the Edit screen to modify the following:
Name
Mode
> Virtual LANs from the main menu tree.
Port VLAN Change Warning
Displays a read only field and with the name of the Ethernet to which the VLAN is
associated.
Use the drop-down menu to select the mode. It can be either:
• Access – This Ethernet interface accepts packets only form the native VLANs.
If this mode is selected, the Allowed VLANs field is unavailable.
• Trunk–The Ethernet interface allows packets from the given list of VLANs you
can add to the trunk.
Network Setup
Edit button.
message stating communication
4-11