Management Features - Motorola WS5100 Series Reference Manual

1.2.3.4 Interface Management
The switch permits a physical interface to Auto Negotiate, Full Duplex or Half Duplex. The switch also
allows:
• The manual bandwidth configuration of a physical interface to 10/100/1000Mbps. This is only permitted
if duplex is not set to Auto-Negotiate.
• Manual configuration of administrative shutdown of a physical interface.
1.2.3.5 DHCP User Class Options
A DHCP Server groups clients based on defined user-class option values. Clients with a defined set of user-
class values are segregated by class. The DHCP Server can associate multiple classes to each pool. Each
class in a pool is assigned an exclusive range of IP addresses.
DHCP clients are compared against classes. If the client matches one of the classes assigned to the pool, it
receives an IP address from the range assigned to the class. If the client doesn't match any of the classes in
the pool, it receives an IP address from a default pool range (if defined).
Multiple IP addresses for a single VLAN allow the configuration of multiple IP addresses, each belonging to
different subnet. Class configuration allows a DHCP client to obtain an address from the first pool to which
the class is assigned. For more information, see

1.2.4 Management Features

The WS5100 supports the following management features:
• A secure browser-based management console
• A Command Line Interface (CLI) accessible via the serial port or through a Secure Shell (SSH) application
• A CLI Service mode enabling the capture of system status information that can be sent to Motorola
personnel for use in problem resolution
• The support for Simple Network Management Protocol (SNMP) version 3 as well as SNMP version 2
• The TFTP upload and download of access port firmware and configuration files
• The graphing of wireless statistics
• A GUI dashboard summary of system status
• Multi switch management via MSP application
• Heat Map support for RF deployment
• Secure guest access with specific permission intervals
• Switch Discovery enabling users to discover each Motorola switch on the specified network.
Configuring the DHCP User Class on page
1-19
Overview
5-18.