Motorola WS5100 Series Reference Manual page 127

1. Select Network > Wireless LANs
2. Select an existing WLAN from those displayed with the
3. Click on the Edit button.
4. Select either the EAP 802.1x,
field.
This enables the Radius button at the bottom of the Network > Wireless LANs > Edit screen.
5. Select the Radius button.
The Radius Configuration screen displays (with the Radius tab displayed by default) for defining an
external Radius or NAC Server.
6. .Select the NAC tab to configure NAC support.
7. Refer to the Server field and define the following credentials for a primary and secondary NAC server.
NAC Server Address
Enter the IP address of the primary and secondary NAC server.
NAC Server Port
Enter the TCP/IP port number for the primary and secondary server. The default
port is 1812.
from the main menu tree.
Configuration
Hotspot or Dynamic MAC ACL
Network Setup
tab.
button from within the Authentication
4-45