Motorola WS5100 Series Reference Manual page 232

5-24 WS5100 Series Switch System Reference Guide
2. Select the Configuration
3. An ACL Id must be created before it is selectable from any of the drop-down menus. Refer to the
Group field to define the following:
Full Access
Only Control Queries Supply a numeric ACL ID from the drop-down menu to provide the ACL only control
Server and Query
Access
Only Server Access
4. Refer to the
Authenticate Time
Sources
Act As NTP Master
Clock
Clock Stratum
tab.
Supply a numeric ACL ID from the drop-down menu to provide the ACL full access.
query access to SNTP resources.
Enter a numeric ACL ID from the drop-down menu to provide the ACL Server and
Query access to SNTP resources.
Provide a numeric ACL ID from the drop-down menu to provide the ACL only server
access to SNTP resources.
Other Settings field to define the following:
Select this checkbox to ensure credential authentication takes place between the
SNTP server and the switch. When this checkbox is selected, the Apply and Revert
buttons become enabled to save or cancel settings.
When this checkbox is selected, the Apply and Revert buttons become enabled to
save or cancel settings within the Other Settings field.
Define how many hops (from 1 to 15) the switch is from a SNTP time source. The
switch automatically chooses the SNTP resource with the lowest stratum number.
The SNTP supported switch is careful to avoid synchronizing to a server that may
not be accurate. Thus, the SNTP enabled switch never synchronizes to a machine
not synchronized itself. The SNTP enabled switch compares the time reported by
several sources, and does not synchronize to a time source whose time is
significantly different than others, even if its stratum is lower.
Access