Viewing Filtered Mus - Motorola WS5100 Series Reference Manual

5. When using the
known bad ESSIDs for the violation parameter. To enter this information, select
bad ESSIDs and then click the
can be added and removed.
NOTE: If using the
are entered in the
6. Click on Apply
7. Click on Revert

6.3.2 Viewing Filtered MUs

Periodically check the
on the settings defined within the
attributes exported to a user defined location.
To view status of those MUs filtered using the settings defined within the
1. Select Security
2. Click on the Filtered MUs
The Filtered MUs tab displays the following read-only information for detected MUs:
MAC Address
Radio Index
Frames with known bad
Bad Essid Config
Frames with known bad ESSIDs
Bad Essid Config
button to save the configuration.
to rollback to the previous configuration.
Filtered MUs tab to review MUs filtered by the switch for incurring a violation based
Configuration
> Mobile Unit Intrusion Detection
tab.
Displays the MU's MAC address. Defer to this address as the potentially hostile
MU's identifier.
The radio index displays the index of the detected MU. Use this information to
discern whether the detected MU is known and whether is truly constitutes a
threat.
ESSIDs violation parameter it is necessary to enter a list of
button to launch a dialogue box where bad ESSIDs
violation parameter if no ESSIDs
dialogue, this parameter will not function.
tab. Each MU listed can be deleted from the list or its
from the main tree menu.
Switch Security
Frames with known
Configuration tab:
6-11