Viewing The Switch Configuration - Motorola WS5100 Series Reference Manual

3-2 WS5100 Series Switch System Reference Guide
NOTE: When the switch's configuration is successfully updated (using the Web UI), the
effected screen is closed without informing the user their change was successful.
However, if an error were to occur, the error displays within the effected screen's Status
field and the screen remains displayed. With file transfer operations, the transfer screen
remains open during the transfer and remains open upon completion (with status
displayed within the Status field).

3.1.1 Viewing the Switch Configuration

The system requests the correct country code after the first login. A warning message may display stating
an incorrect country setting will lead to the illegal use of the switch. Consequently, selecting the correct
country is extremely important. Each country has its own regulatory restrictions concerning electromagnetic
emissions (channel range) and the maximum RF signal strength transmitted. To ensure compliance with
national and local laws, be sure to set the
To view a high-level display of the switch configuration:
1. Select Switch
2. Click the Configuration
3. The system prompts the user for the correct
A warning message could display stating that an incorrect country setting will lead to an illegal use of
the switch. Selecting the correct country is extremely important. Each country has its own regulatory
restrictions concerning electromagnetic emissions (channel range) and the maximum RF signal strength
transmitted. To ensure compliance with national and local laws, be sure to set the Country correctly.
4. Refer the System
Country
from the main menu tree.
tab.
field to view or define the following information:
value correctly.
Country code after the first login.