Motorola WS5100 Series Reference Manual page 124

4-42 WS5100 Series Switch System Reference Guide
6. Refer to the
RADIUS Server
Address
RADIUS Port
RADIUS Shared
Secret
Server Timeout
Server Retries
NOTE: The Radius or NAC server's
defined for an MU's timeout and retries. If the MU's time is less than the server's, a fall
back to the secondary server will not work.
7. Refer to the
Server.
Accounting Server
Address
Accounting Port
Accounting Shared
Secret
Accounting Timeout
Accounting Retries
Accounting Mode
8. Select the Re-authentication
Periodic repetition of the authentication process provides ongoing security for currently authorized
connections. Define an interval between 30 and 65535 seconds.
Server field and define the following credentials for a primary and secondary Radius server.
Enter the IP address of the primary and secondary server acting as the Radius user
authentication data source.
Enter the TCP/IP port number for the primary and secondary server acting as the
Radius user authentication data source. The default port is 1812.
Provide a shared secret (password) for user credential authentication with the
primary or secondary Radius server.
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
server.
Enter a value between 1 and 100 to indicate the number of times the switch
attempts to reach the primary or secondary Radius server before giving up.
Accounting field and define the following credentials for a primary and secondary Radius
Enter the IP address of the primary and secondary server acting as the Radius
accounting server.
Enter the TCP/IP port number for the primary and secondary server acting as the
Radius accounting data source. The default port is 1813.
Provide a shared secret (password) for user credential authentication with the
primary or secondary Radius accounting server.
Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out a request to the primary or secondary
accounting server.
Enter a value between 1 and 100 to indicate the number of times the switch
attempts to reach the primary or secondary Radius accounting server before giving
up.
Use the Accounting Mode drop-down menu to define the accounting mode as
Start-Stop Stop Only
either ,
seconds) used with the selected accounting mode.
checkbox to force a periodic re-authentication with the Radius server.
Timeout and Retries should be less than what is
Start-Interim-Stop
or . Define the interval (in