Motorola WS5100 Series Reference Manual page 148

4-66 WS5100 Series Switch System Reference Guide
4.5.4.1 Adding an Include List to a WLAN
To add a device to a WLAN's include list configuration:
1. Select Network
2. Select the NAC Include
3. Click on the
4. Enter the name of the device to include for NAC authentication.
5. Refer to the
any "SET/GET" operation from the applet. The Status field displays error messages if something goes
wrong in the transaction between the applet and the switch.
6. Click OK to save the new configuration and close the dialog window.
7. Click Cancel
4.5.4.2 Configuring Devices on the Include List
To add a multiple number of devices for a single device type:
1. Select Network
2. Select the NAC Include
3. Click on the
The List Name
4. Enter the Host Name
5. Enter a valid
6. Optionally, enter the
> Wireless LANs from the main menu tree.
tab to view and configure NAC Include enabled devices.
Add button in the Include Lists
Status field. It displays the current state of the requests made from the applet. Requests are
to close the dialog without committing updates to the running configuration.
> Wireless LANs from the main menu tree.
tab to view and configure all the NAC Include enabled devices.
Add button within the List Configuration
field displays the name of the device list used. This parameter is read-only.
for the device you wish to add.
MAC Address of the device you wish to add.
MAC Mask for the device you wish to add.
area.
area.