Motorola WS5100 Series Reference Manual page 319

4. Refer to the Transform Sets
Name
AH Authentication
Scheme
ESP Encryption
Scheme
ESP Authentication
Scheme
Mode
5. Select an IPSec VPN transform set (by its index) and click the
more information, see
6. Select an index and click the
7. If none of the transform sets displayed appear useful, click the
information, see
6.8.1.1 Editing an Existing Transform Set
If the attributes of an existing transform set no longer lend themselves useful, consider editing the transform
set to be relevant with the needs of existing VPN peers.
To edit the attributes of an existing transform set:
1. Select Security
2. Click the Configuration
3. Select an existing transform set and click the
field to view the following data:
Displays a transform set identifier used to differentiate transform sets. The index
is helpful when transform sets with similar attributes need to be revised or
discarded.
Displays the AH Transform Authentication scheme used with the index. Options
include:
• None - No AH authentication is used.
• AH-MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• AH-SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Displays the ESP Encryption Transform used with the index. Options include:
• None - No ESP encryption is used with the transform set.
• ESP-DES - ESP with the 56-bit DES encryption algorithm.
• ESP-3DES - ESP with 3DES, ESP with AES.
• ESP-AES - ESP with 3DES, ESP with AES (128 bit key).
• ESP-AES 192 - ESP with 3DES, ESP with AES (192 bit key).
• ESP-AES 256 - ESP with 3DES, ESP with AES (256 bit key)
Displays the ESP Authentication Transform used with the index. Options include:
• None - No ESP authentication is used with the transform set.
• MD5-HMAC - AH with the MD5 (HMAC variant) authentication algorithm.
• SHA-HMAC - AH with the SHA (HMAC variant) authentication algorithm.
Displays the current mode used with the transform set. The mode is either tunnel
or transport.
Editing an Existing Transform Set on page
Delete button to remove it from the table.
Adding a New Transform Set on page
> IPSec VPN from the main menu tree.
tab.
Edit button to modify its properties. For
6-49.
Add button to create a new one. For more
6-51.
Edit button.
6-49
Switch Security