Motorola WS5100 Series Reference Manual page 121

4. Select the Hotspot button from within the Authentication field.
Ensure Advanced is selected from within the
NOTE: Advanced hotspot configuration is not permissible using the switch Web UI. Refer
to the switch CLI or other advanced configuration options to define a hotspot with
advanced properties. However, the switch can still install and maintain directories
containing Web page content.
5. Once the properties of the advanced hotspot have been defined, the file can be installed on the switch
and used to support the hotspot. The following parameters are required to upload the file:
a. Specify a source hotspot configuration file. The file used at startup automatically displays within the
File parameter.
b. Refer to the Using drop-down menu to configure whether the hotspot file transfer is conducted using
FTP or TFTP.
c. Enter the IP Address
IP address is valid or risk jeopardizing the success of the file transfer.
d. If using FTP, enter the
server.
e. If using FTP, enter the
f. Specify the appropriate
This WLAN's Web Pages are of the
of the server or system receiving the source hotspot configuration. Ensure the
User ID credentials required to transfer the configuration file from a FTP
Password required to send the configuration file from an FTP server.
Path name to the hotspot configuration on the local system disk or server.
4-39
Network Setup
drop-down menu.