Motorola WS5100 Series Reference Manual page 158

4-76 WS5100 Series Switch System Reference Guide
3. Select a MU from the table in the Status screen and click the
4. Refer to the following read-only MU's transmit and receive statistics:.
MAC Address
IP Address
Power Save
WLAN
VLAN
Last Active
QoS Information
Radio Index
Radio Type
Base Radio MAC
BSS Address
Displays the Hardware or Media Access Control (MAC) address for the MU.
Displays the unique IP address for the MU. Use this address as necessary
throughout the applet for filtering and device intrusion recognition and approval.
Displays the current PSP state of the MU. This field has two potential settings.
PSP indicates if the MU is operating in PSP mode. In PSP, the MU runs enough
power to check for beacons, and is otherwise inactive. CAM indicates the MU is
continuously aware of all radio traffic. CAM is recommended for MUs transmitting
frequently.
Displays of the WLAN the MU is currently associated with.
Displays the VLAN parameter for the name of the VLAN the MU is currently
mapped to.
Displays the time the MU last interoperated with the switch.
Displays an indicator of the wireless device's battery life. Additionally, the service
period for the selected MU is also displayed.
Displays is a numerical identifier used to associate a particular Radio with a set
of statistics. The Index is helpful for distinguishing the a particular radio from
other MU radios with similar configurations.
Displays the radio type used by the adopted MU. The switch supports 802.11b
MUs as well as 802.11 a/b and 802.11 a/g dual-radio MUs. The radio also
supports 802.11a only and 802.11g MUs.
Displays the SSID of the access port when initially adopted by the switch.
Displays the MU's BSSID.
Details button.