Configuring Trap Thresholds - Motorola RFS7000 Series System Reference Manual

Wireless
5. Click the Expand All Items
to display every trap that can be enabled.
Once expanded, traps can then be enabled by trap category or individually within each trap category.
6. Highlight a specific trap and click the
trap.
The items previously disabled (with an "X" to the left) now display with a check to the left of it.
7. Highlight a specific trap and click the
The items previously enabled (with a check to the left) now display with an "X" to the left of it.
8. Highlight a sub-menu header (such as Redundancy or Update Server) and click the
items button to enable the item as an active SNMP trap.
Those sub-items previously disabled (with an "X" to the left) now display with a check to the left of
them. Once the Apply
9. Highlight a sub-menu header (such as Redundancy or SNMP) and click the
button to disable the item as an active SNMP trap.
Those sub-items previously enabled (with a check to the left) now display with an "X" to the left of
them.
10. Click Apply to save the trap configurations enabled using the Enable or Enable all sub-items options.
11. Click Revert to discard any updates and revert back to its last saved configuration.

7.4.2 Configuring Trap Thresholds

Use the Wireless Statistics Thresholds
trap descriptions. Refer to the greater than, less than and worse than conditions to interpret how the values
should be defined. Additionally, the Unit of threshold Values increment should be referenced to interpret the
unit of measurement used.
To configure SNMP trap threshold values:
1. Select Management Access
Displays the list of sub-items (trap options) specific to Wireless
configuration. These include traps specific to wireless
interoperability between the switch and its associated devices.
Select an individual trap and click the
specific trap or highlight the Wireless trap family parent item and
click Enable all sub-items
category.
button to display the sub-items within each trap category. Use this item
Enable button to enable this specific trap as an active SNMP
Disable button to disable the item as an active SNMP trap.
button is clicked, the selected items are now active SNMP traps on the system.
screen to modify existing threshold conditions values for individual
> SNMP Trap Configuration
Switch Management
Enable button to enable a
to enable all traps within the Wireless
Disable all
from the main menu tree.
7-13
Enable all sub-
sub-items