Configuring Trap Thresholds - Motorola RFS Series Reference Manual

7-14 Motorola RF Switch System Reference Guide
From Address
Subject Prefix
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Click Cancel

7.4.2 Configuring Trap Thresholds

Use the Wireless Statistics Thresholds
individual trap descriptions. Refer to the greater than, less than and worse than conditions to interpret how
the values should be defined. Additionally, the Unit of threshold Values increment should be referenced to
interpret the unit of measurement used.
To configure SNMP trap threshold values:
1. Select Management Access
2. Click the Wireless Statistics Thresholds
3. Refer to the following information for thresholds descriptions, conditions, editable threshold values and
units of measurement.
Threshold Name
(Description)
Threshold Conditions Displays the criteria used for generating a trap for the specific event. The Threshold
Threshold values for:
MU
Enter an e-mail address that will serve as the From address for the notifications
sent by the switch.
Enter a short subject line that will prepend the subject line in each outgoing
notification e-mail.
to close the dialog without committing updates to the running configuration.
screen to modify existing threshold conditions values for
> SNMP Trap Configuration
Displays the target metric for the data displayed to the right of the item. It defines
a performance criteria used as a target for trap configuration.
conditions appear as greater than, less then or worse then and define a baseline
for trap generation.
Displays a threshold value for associated MUs. Use the
Threshold Conditions
unique to the MUs within the network. For information on specific values, see
Wireless Trap Threshold Values on page
from the main menu tree.
tab.
as input criteria to define an appropriate Threshold Value
7-16.
Threshold Name and