Table of Contents
Advertisement
5.5.2 Second Dword
31
x
x
x
x
x
x
x
5.5.3 Read-Modify-Write Cycles
A[6:0]
Register Address - A[6:0]
It is possible to change register values from SCRIPTS in
read-modify-write cycles or move to/from SFBR cycles.
A[6:0] selects an 8-bit source/destination register within
the LSI53C875A.
ImmD
Immediate Data
This 8-bit value is used as a second operand in logical
and arithmetic functions.
A7
Upper Register Address Line [A7]
This bit is used to access registers 0x80–0xFF.
R
Reserved
DMA SCRIPTS Pointer Save (DSPS)
x
x
x
x
x
x
x
Destination Address
This field contains the 32-bit destination address where
the data is to move.
During these cycles the register is read, the selected operation is
performed, and the result is written back to the source register.
The Add operation is used to increment or decrement register values (or
memory values if used in conjunction with a Memory-to-Register Move
operation) for use as loop counters.
Subtraction is not available when SFBR is used instead of data8 in the
instruction syntax. To subtract one value from another when using SFBR,
first XOR the value to subtract (subtrahend) with 0xFF, and add 1 to the
resulting value. This creates the 2's complement of the subtrahend. The
two values are then added to obtain the difference.
Read/Write Instructions
Register
x
x
x
x
x
x
x
x
x
x
x
x
x
x
[22:16]
[15:8]
7
[6:0]
0
x
x
x
x
[31:0]
5-23
Advertisement
Chapters
Table of Contents
