In-Service Upgrade - Fujitsu 1FINITY L100 User Manual

System Description and Engineering
System Features
% set fabric och-connection XCON-DROP-CH2 src-if ots-1/0/0/E1 src-och 2 dst-if
och-7/1/0/C2
% commit
Different Hierarchy—A set of commands used for different types of entities.
Command Examples (Different Hierarchy):
% set interfaces interface och-2/1/0/C1 type opticalChannel enabled och remote-tp-
type fujitsu-tp
% set interfaces interface ots-1/0/0/E1 ots oms och 1 center-frequency 196.1 admin-
status up slot-width 50.0
% set fabric och-connection XCON-ADD-CH1 src-if och-2/1/0/C1 dst-if ots-1/0/0/E1
dst-och 1
% set fabric och-connection XCON-DROP-CH1 src-if ots-1/0/0/E1 src-och 1 dst-if
och-2/1/0/C1
% commit
1.4.3

In-Service Upgrade

In-service upgrade ensures that no traffic impact and database upgrade issues occur during software upgrade.
The following table lists the supported software release upgrade paths.
Table 1
Upgrade Paths
FROM
Release G-ISSUE
2.3 02‑03‑1
2.3.2 02‑03‑2
2.4 02‑04‑1
2.4.2 02‑04‑2
2.5 02‑05‑1
2.5.2 02‑05‑2
2.6.2 02‑06‑2
·
Release 19.1.1 Issue 1.1, May 2021
TO Release
Direct Upgrade
2.4 2.4.2
Yes —
— —
— Yes
— —
— —
— —
— —
2.5 2.5.2
— —
Yes —
— —
Yes —
— —
— —
— —
42
2.6.2 19.1.1
— —
— —
— —
Yes —
Yes —
— Yes
— Yes
Fujitsu and Fujitsu Customer Use Only