Function Keys; Charge Key - Sam4s SPS-300 Series Manual

Function Keys

Charge Key

The CHARGE1 function defaults to a credit card function; the CHARGE2 function defaults to a debit
card function and the CHARGE3 key defaults to a gift card function. Additional Charge keys can be
programmed as needed; Charge key function keys are key codes 323-330. Set option N4 to send the
transaction to the EFT and set option N5 to reflect the type of payment.
1. From the PGM control lock position menu, press 5 for FUNCTION KEY. The FUNCTION
KEY PROGRAM screen displays.
2. Press one of the CHARGE keys to view the charge key options.
3. Press PAGE DOWN twice to view the third page of charge key options:
Required
Setting
Required
Setting
•
•
4. Press the CASH key to finalize and then press CLEAR to return to the main PROGRAM
MODE screen.
SPS-300 SmartECR Supplement v1.11
COMPULSORY VALID
SEND TO EFT
ALLOW UNDERTENDERING
IN MANAGER CONTROL MODE ONLY
SELECT (1:CREDIT, 2:DEBIT,
3:GIFT, 4:EBT, 5:MOTO,
6:CASH BENEFIT)
Select Y (YES) at the "SEND TO EFT" field.
Select the card type at the "SELECT" field: 1:CREDIT, 2:DEBIT, 3:GIFT,
4:EBT, 5:MOTO or 6:CASH BENEFIT.
CHARGE 1 PROG.
SPS-300 Series Program Information • 21

N

Y
N
1