Table of Contents
Advertisement
CCLINUX
USER Manual
As shown in the figure, select the type of network (use Ethernet as an example) to select
"Ethernet", then click the "Create..." button, the running interface is shown in Figure 5-3-4. You can
set the network connection name, general settings, Ethernet, 802.1X security, IPv4 settings, IPv6
.
settings
2.5.4 Restore Configuration
1.
Introduction:
Use the "Restore Factory" to restore all parameters to the factory state; this feature is limited to
root.
2.
Operating procedures:
Click "Start" -> "Preferences" -> "Restore Configuration", the running interface is shown in Figure
5-4-1:
Issue 1.2 (2018-09-06)
Figure 5-3-4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
44
Hide quick links:
Advertisement
Table of Contents
