Input Resolution For Av Devices - IDK MSD-501 User Manual

MSD-501/502/701/702 User's Guide

7.10.3 Input resolution for AV devices

Menu Top→EDID→AV RESOLUTION
Setting for Each input (only digital input)
Setting value
・AUTO [Default] ・480p
・UNUSED
You can set the resolution requested to be output from AV devices (such as Blu-ray players).
This setting will be valid if "INTERNAL EDID" is selected for "7.10.1 EDID".
Normally, set this menu to "AUTO" to set resolution for AV devices according to "7.10.2 Resolution for PCs"
automatically.
"UNUSED" disables the EDID for AV devices. If you select "AUTO" and the resolution output from the PC is
different from the resolution set in Properties, the problem may be solved by selecting "UNUSED".
If there is a potential to connect both PCs and AV devices with different resolutions (for example, PC with
WXGA (1366x768), Blu-ray disc player with 1080p), set the PC resolution in " 7.10.2 Resolution for PCs"
and select the AV resolution from 480p, 720p, 1080i, and 1080p in this menu. However, some PCs and AV
devices may choose the higher resolution of the resolutions set in " 7.10.2 Resolution for PCs" or this menu.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
800 1024
PC resolution x x
600 768
AV resolution 480p
Note:
If you select "UNUSED", the settings of "7.10.4 Deep Color", "7.10.5 Audio format", and "7.10.6 Speaker
configuration" will be disabled and audio is not output because the source device outputs signal through DVI
mode.
62
・1080i
・720p ・1080p
[Table 7.1] Input resolutions when "AUTO" is selected
1280 1280 1280 1280 1280
x x x x
720 768 800 960 1024
1360 1366 1400 1440
x x x x x
768 768 1050 900
720p
1600 1600 1680 1920 1920
x x x x x
900 1200 1050 1080i 1080p
1080i
1920 2048
x x
1200 1152
1080p