Input Resolution For Av Devices - IDK MSD-6203 User Manual

9.11.3 Input resolution for AV devices

Menu Top→EDID→AV RESOLUTION
Setting for Each input channel, digital input only
Setting value
・AUTO [Default]
・UNUSED
・480p
You can set the resolution requested to be output from AV devices (such as Blu-ray players).
"2160p@30", "4096x2160@30": can be selected for IN1, IN5, and IN6.
This setting is applied if "9.11.1 EDID" is set to "INTERNAL EDID".
Normally, set this menu to "AUTO" to set resolution for AV devices according to "9.11.2 Resolutions for PCs"
automatically.
"UNUSED" disables the EDID for AV devices. If you select "AUTO" and the resolution output from the PC is
different from the resolution set in Properties, the problem may be solved by selecting "UNUSED".
If there is a potential to connect both PCs and AV devices with different resolutions, set the PC resolution in
"9.11.2 Resolutions for PCs" and select the AV resolution in this menu. However, some PCs and AV devices
may select the higher resolution of the resolutions set in "9.11.2 Resolutions for PCs" and this menu.
If a source device that does not support 4K is connected to the input connector with 4K EDID settings, the
source device may output DVI signal meaning audio is not output. In order to output HDMI signal from the
source device, change the settings of this menu and "9.11.2 Resolutions for PCs" to a value other than 4K.
Press the MENU/SET key to apply the setting.
Resolution for
PC
Resolution for
AV
Notes:
・If you select "UNUSED", the settings of "9.11.4 Deep Color", "9.11.5 Audio format",
"9.11.6 Speaker configuration" will be disabled and audio is not output because the source device outputs
signal through DVI mode.
・Signals may not be output at 4K depending on contents and AV devices.
・720p
・1080i
・1080p
[Table 9.17] Input resolutions in "AUTO" mode
MSD-62 Series User's Guide
・2160p@30
・4096x2160@30
107