Gpio Setup Window - Christie CP 2210 User Manual

Add a Network Device
1. In the Device Name area, select the check box to the left of the device you are adding.
2. Enter the device name in the Device Name field.
3. In the URL field, enter the URL of the device you are adding
4. Click Menu, select Network Device, and then select a network device. The web interface for this device
appears.

6.15.9 GPIO Setup Window

Use the GPIO Setup window to configure the input and output settings of the GPIO interface. To open the
GPIO Setup window you need Administrator or Service permissions. Tap Menu > Administrator Setup >
GPIO Setup.
Table 6.29 GPIO Setup Window
Control
Rising Edge
Falling Edge
Trigger
Output
CP2210 User Manual
020-100410-07 Rev. 1 (01-2012)
1
Figure 6-36 GPIO Setup Window
Description
The rising edge for the signal.
The falling edge for the signal.
The trigger that is sent when the function is activated.
The output that triggers the GPIO signal.
Section 6: Projector Menus
.
2
6-43