Power Management; Filter Counter - Christie APS Series User Manual

Power management

To reduce power consumption and maintain lifecycle of light source, the power management function turns off
the projection light source if the projector has no signals for a period of time.
• Factory default for standby time: Five minutes.
• Count down for ready mode: Five minutes.
Follow these steps to set the power management.
1. Select to select the Power management menu.
2. Select OK.
3. Select to switch required item.
• Ready
• Shut down
• Off
• Timer
• Ready Countdown

Filter counter

Set this function to reset the filter usage time and set up warning display.
LWU605ST-APS
1. Select to select the Filter counter menu.
2. Select OK.
3. Select to switch required item.
• Filter counter—Displays the filter usage time.
• Timer—Set the time to display a warning icon.
• Filter counter reset—Reset filter counter.
• Filter check—Check the filter time of projector and respond (LWU505ST-APS only).
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
LWU505ST-APS
Menu items
52