10 - Drive for rear lid
❑ Removing and installing drive for rear lid
11 - Gas strut
❑ Removing and installing
❑ Releasing gas
⇒ page 91
12 - Mounting bracket for ball-head pin
❑ Left and right
❑ On side panel
❑ 10 Nm + 45°
13 - Bolts
❑ On side panel
❑ Qty. 2 on each side
❑ 10 Nm + 45°
14 - Hexagon nut
❑ Qty. 1 for each hinge
❑ 20 Nm + 45°
15 - Bolts
❑ Qty. 2 for each hinge.
❑ 10 Nm
16 - Hinge
❑ Left and right
❑ Removing and installing
17 - Rubber grommet
❑ Removing and installing
2.2
Removing and installing rear lid
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
Removing
General body repairs, exterior - Edition 01.2018
⇒ page 91
⇒ page 89
⇒ page 83
⇒ page 59
Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
59
2. Rear lid