Installation Checklist And Instruction Of The User - h/p/cosmos 150/50 mercury Operating And Service Manual

7.4.9

Installation checklist and instruction of the user

The authorized technician (distributor or service partner) checks whether the installation of the device has been performed
properly. Among other things, he ensures that at least the nine points of the following checklist have been performed and/or
checked before the customer is introduced to the operation of the h/p/cosmos device. For detailed information and
instructions on installation and commissioning please refer to all respective chapters in this manual.
Then, the h/p/cosmos employee / h/p/cosmos partner instructs the user according to the instruction protocol in appendix 2. It
is important to include all people in the instruction and commissioning who are going to work with the running machine. After
the instruction is completed, the instruction protocol has to be signed by the h/p/cosmos technician and all trained persons
and returned, together with the signed delivery note and the registration form, to h/p/cosmos.
No.
Illustration
[01]
[02]
[03]
[04]
© 2012 h/p/cosmos sports & medical gmbh
Description
Compare the delivery note with the installed running machine.
Are all parts (running machine, accessories, service box and
running machine folder) complete and without damage?
Adjust the levelling sockets.
Tighten all fixation screws of the handrails.
Check the wall socket: visual check for damage, burned contacts,
proper fixation and good ground contact (no paint, dirt,
deformation).
Check the correct pin assignment of the wall socket with a socket
tester with direct indication (see picture left). As testing-device, we
recommend the Testavit Schuki 3 – [cos15900] (separate
instructions available at h/p/cosmos).
Check the electrical connection: There should be a direct
connection to the wall socket with separate fuse, no danger of
stumbling, no extension cable, no multiple plug socket, separate
circuit for the treadmill. If a correct connection to the wall socket is
not possible, note this on the delivery note, inform the customer
and disengage the device if necessary. Secure it against start-up.
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
safety, installation and commissioning
created 04.05.2012 printed 04.05.2012
accomplished
accomplished
accomplished
accomplished
page: 94 of 191