h/p/cosmos 150/50 mercury Operating And Service Manual page 49

The following tables describe further tests and profiles within the test mode.
2. Graded test,
e.g. for determination of anaerobic threshold via blood lactate measurement + heart rate curve of the subject
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
© 2012 h/p/cosmos sports & medical gmbh
Endurance test (max. load test) with the parameters
N Start speed
N Step length in min:sec.
N Increment / step height
N Acceleration level
N Break time in min:sec
(e.g. for determination of an aerobic threshold by means of taking blood
samples during load breaks and lactate analysis with external lactate
analysing equipment.
Standard load profile:
Start speed: 8.0 km/h, must be changed according to the condition of the
N
subject
Step length: 3 min (can be changed)
N
Increment: 2.0 km/h (can be changed)
N
Acceleration level: 4 (adjustable from 1 to 5)
N
Break time: 30 sec. (can be changed)
N
STOP must be activated manually by the medical doctor.
In an already pre-defined step test it is possible to set the pre-programmed
pause times individually during the test, i.e. the pause can be prolonged or
ended immediately.
End pause manually:
Once the test profile has reached the pause mode and the running belt has
come to a halt, you can select the next program step immediately with START
– either with warning sound signals at the beginning by pressing START once
or without by pressing START twice. This is done independently of the pre-
defined pause times and has no influence on the following run of the program,
i.e. the following program steps remain unaffected. By pressing the START
button, the next scheduled speed step is started. The pause can also be
ended with the „+" button. In this case the speed set depends on the point of
release of the „+" button.
Prolong pause:
Once the test profile has reached the pause mode and the running belt has
come to halt, it is possible to freeze pause with the „-" button,
indicates PAUS
To end pause you can either press START or „+" – see: end pause manually.
email@h-p-cosmos.com created 04.05.2012
=
printed 04.05.2012 page: 49 of 191
operation