List Of Running Machines Types - h/p/cosmos 150/50 mercury Operating And Service Manual

OP33 Distance between rungs of the
ladder ergometer
(option only available for ladder
ergometers, not for treadmills)
OP34 Manual speed calibration
(counted increments from the speed
sensor for 10 m belt movement)
Note.
Normally the speed calibration
values are set by selecting the
correct device type (administrator
option number 3).
.
OP35 Oil interval
© 2012 h/p/cosmos sports & medical gmbh
For correct calculation of the number of rungs / steps, the distance
between two rungs can be changed and confirmed in this option.
Standard: 254 for 25.4 cm
This value is permitted to be changed only if the final drive ratio
changes.
If you change the speed calibration value, please also pay attention to
the correct settings in OP5 (firmware speed limit), OP11 (speed
measurement; must be switched on) and OP48 (frequency inverter
speed limit) of the administrator mode. To change the speed
calibration value, please use the + and – buttons. For quick
movements between standard values, please use the UP and DOWN
buttons.
If the speed measurement is switched off in OP11, OP34 will only
report internal program absolute values. Otherwise, you can see the
stored values in the list of running machines types in the appendix.
The distance interval for indication of required "OIL" service can be
adjusted by means of OP 35.
Standard = 1000 km for treadmills, 100 km for ladder ergometers.
OIL intervals are indicated with error code "E01" "OIL" every 1000
km.
§
km is flashing, adjustment range: OFF, 100 ... 5.000 km
Do not change the interval without prior communication with
h/p/cosmos. For the models h/p/cosmos venus and saturn, JAEGER
CareFusion LE 580 CE and larger as well as COSMED T200 and
larger, OP35 is not adjustable because the machines are equipped
with an automatic oil pump and tank.
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
optional settings: administrator options
indicates oil interval in km (standard = 1.000)
created 04.05.2012 printed 04.05.2012 page: 126 of 191