h/p/cosmos 150/50 mercury Operating And Service Manual page 69

OP45 Report mode display "Index"
"
OP46 Report mode display "Elevation"
$
in profile mode and test
mode
OP47 Sustain values in display resp.
automatic "Reset"
OP48 Countdown of program step
OP52 Output interval for printer protocol
OP53 Language settings for printer
protocol
© 2012 h/p/cosmos sports & medical gmbh
0 = Display alternates (default)
1 = Display permanently in MET
2 = Display permanently in KJ
3 = Display permanently in Watt
After total switch off the default value 0 will be valid again.
0 = Display alternates (default)
1 = Display permanently in % or degree (°), depending on OP14
2 = Display permanently in "Step"
After total switch off the default value 0 will be valid again.
OFF = Display values are deleted after pressing START again or
automatically after 2 minutes after having pressed STOP (Default)
ON = Display values will be continued (added) after pressing START
again and will not be automatically deleted by pressing STOP.
Display values can only be deleted by pressing the STOP key twice
(time, distance, energy).
OFF = The time display counts up each program step
ON = The time display counts down each program step
By entering a value between 0 and 100, the output interval is set in
seconds for a printer directly connected to the treadmill. Standard: 60
(= printout of all values once a minute). The value 0 disables printing
of single values, but not printing of headers and end results (UKK).
Select the language for printouts on a printer directly connected to the
treadmill. One of six languages can be chosen. Both, the protocol
printout and the test result and training recommendation of the UKK 2
km walking test are printed in the selected language.
EnGL = Englisch (standard)
GErM = German
FrEn = French
For correct printout, the connected printer must be compatible with
PCL printer language. For special characters the ISO 8859-1 (Latin-1)
font is used.
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
SPAn = Spanish
POrt = Portuguese
HUnG = Hungarian
created 04.05.2012 printed 04.05.2012
operation
page: 69 of 191