Wheelchair Ramp - h/p/cosmos 150/50 mercury Operating And Service Manual

12.11 Wheelchair ramp

wheelchair ramp 150/50 [cos16186-01]
12.12 Wheel chair stabilizer for oversize running machines
Wheel chair stabilizer for deck length 200cm: [cos10227] 250cm: [cos10226] 300cm: [cos00096110031]
Available for the h/p/cosmos running machine series with track size 200/75 cm (and bigger) with the mark "r"
Before using the running machine for any application without a wheelchair (running, cycling,
skating etc.), the wheelchair stabilizer has to be dismantled for safety reasons. No remaining
dangerous barrier, crossbar or other part of the wheelchair stabilizer must obstruct or injure the subject.
When using the wheelchair ramp pay particular attention to the gap between
ramp and running belt so that hands, hair, clothing or other items do not get
caught. The ramp must not touch the running belt as this will lead to excessive
wear. Ensure that the ramp is stable and cannot slip. Be aware of danger of
slipping or tripping on ramp. Do not attempt to enter ramp from the side. Only
original h/p/cosmos wheelchair access ramps should be used.
With the help of the h/p/cosmos wheel chair stabilizer, it is easy to keep
wheel chairs with 3 or 4 wheels safely in line. The guide rail is fixed
between the two pillars of the right-hand side handrail. The metal spring,
which has to be mounted on the guide rail, prevents the wheel chair
from rolling too far back. The wheelchair application is only allowed in
combination with the safety harness (chest belt and fall stop). Take care
that the brakes on the wheelchair are deactivated (e.g. dismantle brake
suspension).
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
© 2012 h/p/cosmos sports & medical gmbh email@h-p-cosmos.com created 04.05.2012
accessories and options
printed 04.05.2012 page: 155 of 191