Pull Cord Safety Stop Actuator - h/p/cosmos 150/50 mercury Operating And Service Manual

12.15 Pull cord safety stop actuator

This stop function is a safety feature that is used with a waist belt. The patient or athlete is connected via cord to a
magnetic switch at the UserTerminal. In the event that the user falls, the magnet is ripped off the UserTerminal and the
running machine stops immediately. With magnet detached, "PULL STOP" will occur in the display. The pull cord safety
stop actuator does not prevent the subject from falling. With reverse belt rotation (downhill), the patient must always be
secured, either with the pull cord safety stop actuator or with the safety arch with chest belt system.
Pull cord safety stop actuator (magnet with STOP function): [cos00098050043]
Chest harnesses, patient vests, waist belts with leash and cuffs are not designed for direct skin or
mucous membrane contact. Wear appropriate clothing.
12.16 Bottle holder, drinking bottle
Bottle holder for handrail diameter 60 mm [cos11020]
h/p/cosmos drinking bottle 0.5 l [cos15485]
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
© 2012 h/p/cosmos sports & medical gmbh
The length of the pull cord should be adjusted so
that the subject can not use the rear 30 % of the
running deck. It limits the range of motion of the
subject to the 70 % of the front part of the running
deck length based on EN 957-6 norm.
The bottle holder is available for all h/p/cosmos running machines
and can be easily fixed with a clamp on a handrail with 60 mm
diameter. The position of the bottle holder should not be at the
rear end of the handrail, because this end must be reachable for
the subject.
The bottle holder can also be used as a towel holder.
email@h-p-cosmos.com created 04.05.2012
accessories and options
printed 04.05.2012 page: 158 of 191