[4.F] Installation, Overview, Checklist - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Installation, Overview, Checklist
[4.F]
The authorized technician (distributor or service partner) has to check whether the installation of the device has been
performed properly, before the customer is introduced into the operation of the h/p/cosmos device. For detailed
information and instructions for installation and commissioning please refer to all respective individual chapters in this
manual. Among others, following points save to be performed or controlled:
No. Illustration
[01]
[02]
[03]
[04]
© 2008 h/p/cosmos sports & medical gmbh
Description
Compare the delivery note with the installed running machine.
Are all parts like running machine, accessories, service box and
running machine folder complete and without damage.
Adjust the levelling sockets.
Tighten all fixation screws of the handrails.
Check the wall socket: Optical check for damages, burned
contacts, proper fixation and good ground contact (no paint, dirt,
deformation)
Check out the correct pin assignment of the wall socket with a
socket-tester with direct indication (see picture left).
As testing-device we recommend the Testavit Schuki 3 –
[cos15900]
Check the electrical connection of the device: Direct connection to
the wall socket with separate fuse, no danger of stumbling, no
extension cable, no multiple plug socket, separate circuit for the
treadmill. If a correct connection to the wall socket is not possible,
note this on the delivery note, inform the customer and put the
device out of operation (if necessary) and safe
against start-up.
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
installation & commissioning
- Separate instruction available at h/p/cosmos.
created 01.09.2008 printed 08.10.2008
‰
accomplished
‰
accomplished
‰
accomplished
‰
accomplished
page: 36 of 176