Userterminal - h/p/cosmos 150/50 mercury Operating And Service Manual

5.5

UserTerminal

Do not lean on the UserTerminal. Do not put any pressure on the display.
N
Press the keys softly, as confirmation, you will hear a beep.
N
The oversize running machines series h/p/cosmos venus
unit with integrated UserTerminal.
"lt" models are delivered without UserTerminal. It is possible to re-fit "lt"models and to equip oversize running machines
with an additional UserTerminal on the handrail (see chapter 12 entitled "Accessories and options").
External UserTerminal control unit with options:
rolls set and monitor-/laptop arm
If your running machine has no UserTerminal (no display, no keyboard), it can only be controlled via interface RS 232,
e.g. via ECG, Ergospirometry, PC with software h/p/cosmos para graphics
peripheric devices are listed in chapter 12 entitled "Accessories and options".
More recent computers will only have a USB interface instead of the RS232 interface. In that case, a „USB to RS232
interface adapter" is available at h/p/cosmos under order number [cos12769]. For control via USB interface the
processor must be a Pentium 1.8 GHz or higher. To use all functions described below and for maintenance and service,
we recommend the PC software h/p/cosmos para control
If unauthorized persons are believed to have access to the running machine or if there are other
reasons to lock the device, , it has to be blocked for restart. See option "OP40" in chapter 5.10
"Optional settings: User Options".
With OP 41 ... 44 you can also lock separate modes (manual, profile, cardio, test).
© 2012 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
and h/p/cosmos saturn are equipped with an external control
® ®
Retrofitting UserTerminal at handrail
or h/p/cosmos para control
®
(Freeware).
®
created 04.05.2012 printed 04.05.2012
operation
. Compatible
®
page: 29 of 191