Switch On Procedure - h/p/cosmos 150/50 mercury Operating And Service Manual

(e.g. exercise time, distance and index) are displayed. A break can be selected with the "-"key. "PAUS" is then displayed
in the speed display. All current values are sustained and will be continued after restart. The test can be canceled with
the "STOP" key. At the end of the treadmill training, data can be stored and/or printed, depending on selected mode,
connected devices and the software version.
5.2

Switch on procedure

If the running machine is at an angle of elevation > 0 when switched on, it will automatically
move to the position zero (display elevation „INIT"). Please ensure that while lowering the
elevation no harm is done to persons or objects under the running machine.
no. illustration
[01]
[02]
[03]
© 2012 h/p/cosmos sports & medical gmbh
Description
Release all emergency stop buttons of the treadmill ergometer.
picture left: unlatching by turning
picture below: unlatching by pulling
The expulsion fuse at the front of the device (front terminal below
the hood) has to be switched on.
Switch on the running machine by using the white key (until 2003
green "ON" or "I" key) at the FrontTerminal. For some models built
before the year 12/2007 the location of the ON-/OFF-key may also
be the UserTerminal.
The indicator light within the key (push button) is illuminated.
If the indicator does not flash up, please check the power supply,
the expulsion fuse and the emergency stop.
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com created 04.05.2012 printed 04.05.2012
operation
page: 25 of 191