Optional Settings: User Options - h/p/cosmos 150/50 mercury Operating And Service Manual

5.10

Optional settings: User Options

Optional settings serve for example as confirmation of error notes on the display, or for the standard setting of the
device: selection of RS232 interface protocol, etc. For optional settings on devices without UserTerminal, an external
UserTerminal or a connected PC with the software h/p/cosmos para control
Select user options
Initiation: Rnning belt is not moving. One of the modes LED
Step no. Activity
[01]
Select option mode (OPxx)
for users
Note: The option mode for
administrators is only
accessible for authorised
service technicians, not for
users
[02]
Select option no. 01 ... 53
[03]
Confirm option no.
Example: OP 01 (OIL &
other error codes):
Confirmation & deleting by
pressing:
Example: OP 02 (Distance /
km): Confirmation by
pressing
Example: OP 08
(STOP-time / "slow-down-
time"):
a) change value by pressing
confirm value by pressing
b)
© 2012 h/p/cosmos sports & medical gmbh
Keys
a
and simultaneuosly
d
and simultaneuosly
b
for at least 3
seconds.
a d
or
c
c
c
a d
a) or
c
b)
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
is required.
®
is flashing: (manual, profile, cardio, test)
Response / Display
=
indicates: OP 01 flashing (for option no. 01)
! "
indicating: E.rE SEt (for error reset
and
=
indicates: OP 01 ... OP 53 flashing
! "
indicate: a short explanation of the
and
option, e.g.: E.rE SEt (for Error reset)
Read, confirm and set options according to the following
option list. All adjustable values are going to be shown
flashing. All non-adjustable values are not going to be
shown flashing.
Display indicates: donE (confirmation)
created 04.05.2012 printed 04.05.2012
operation
)
page: 64 of 191