h/p/cosmos 150/50 mercury Operating And Service Manual page 66

OP11 Scaling of the profiles in profile
mode (not for test mode)
OP12 Unit for display of speed
OP13 Unit for display of distance
OP14 Unit for angle of elevation
OP15 Subject's body weight
(default value)
OP16 Request for body weight
before manual or automatic start
OP17 Unit for energy consumption
OP18 Maximum speed in cardio mode
(default value)
(this option is only available for
treadmill-ergometers, not for ladder-
ergometers)
Setting of sender for POLAR
W.I.N.D. system
© 2012 h/p/cosmos sports & medical gmbh
§
0: no scaling (standard)
1: Scaling 1...6, which is shown in the profile mode at the display
INDEX, refers to all parameters (speed, elevation, time)
2: Scaling 1...6 refers to each parameter (speed, elevation, time)
individually
=
... without decimal place:
3 = m/min
... with one decimal place:
0 = km/h
... with two decimal places:
20 = km/h
km/h, m/s, mph or m/min is blinking
§
0 = km
m, km, or miles is blinking
$
0 = % (percent)
% or ° blinking
§
weight blinking
The personal body weight is necessary for a more correct calculation
(estimation) of the power and energy consumption.
0 = OFF. Request for body weight before starting a program is not
required. Calculation of energy consumption and power is based on
the body weight entered in option no 15.
1 = ON. Input of body weight before starting a program is required.
Calculation of energy consumption and power is based on the
entered body weight.
JOUL = kJoule is the unit for energy consumption
CALO = kcal is the unit for energy consumption
=
for the default value for maximum speed in the cardio mode.
adjusted unit is blinking,
The value of max. speed in cardio mode can be changed online by
pressing
0000 0000 = all senders are accepted (can also be set with UP and
xxxx xxxx = only specific sender with special ID is accepted,
9999 9999 = next sender will be accepted, saved and filtered (can
(further settings in user OP23 and
administrator OP16 are necessary)
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
shows: scaling possibilities
indicates: unit for speed
1 = m/s 2 = mph 23 = m/min
21 = m/s 22 = mph
indicates: unit for distance
1 = miles 2 = m
indicates: Unit for elevation
1 = ° (degree)
indicates: 10 ... 250 (estimated weight)
reports: 0.0 ... max
max. is blinking
d a
DOWN)
must be set with d and a
also be set with UP and DOWN)
created 04.05.2012 printed 04.05.2012
operation
page: 66 of 191