Manual Mode - h/p/cosmos 150/50 mercury Operating And Service Manual

5.9.2

Manual mode

The following table shows the operating steps for running the the treadmill via firmware or software h/p/cosmos para
control.
Operation of profile mode
Initiation: Running belt is not moving. One of the modes LED
Step no. Activity
[01] Select manual mode
[02] Start manual mode
[03] Alteration of speed
[04] Alteration of
acceleration/
deceleration level
[05] Pause mode
[06] Alteration of elevation
[07] Switch to the next or
previous mode
[08] Stop running belt
© 2012 h/p/cosmos sports & medical gmbh
Keys Response / Display
Alteration of the mode (manual, profile, cardio, test)
a d
until
or
A: standard (in case of deactivation in the optional functions):
c
manual, km/h, m and % are illuminated
met,
Running belt accelerates up to the pre-selected starting speed
(standard: 0.5 km/h, can be changed in the optional settings),
start of measuring
%
indicates present heart rate: P. 40 ... P. 220. The display indicates every
single heart beat with a flashing dot behind the P.
B: In case of activation in the optional functions:
%
indicates: 65 flashing (for 65 kg body weight),
Enter the actual body weight with
of the POWER and ENERGY consumption.
Further steps see A
Speed is being increased / reduced (0-max)
a d
or
If speed is being reduced to 0, PAUS is displayed
be sustained.
press and hold
Example: to select level "3", press the corresponding key 3 times and then hold.
a d
(Standard value = 4, maximum 7 levels, may be limited byoptional settings)
or
press and hold
a
PAUS is displayed.
values will be sustained. After restart with d or c all displayed values will be
"added".
Elevation is being increased / reduced (0 ... max.)
f e
or
press and hold
Switch to the next or previous mode.
c d
This is a perfect way to change the mode without stopping the belt.
+
or
c a
+
Running belt stops.
b
(Deceleration time can be adjusted in the optional functions)
Displayed values and selected mode remain for 2 minutes and will then be
deleted (reset) automatically
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
is flashing: (manual, profile, cardio, test)
manual is flashing
energy and power are illuminated alternately
a
or
=
Running belt stops. All displays stop. Current
.
created 04.05.2012 printed 04.05.2012
operation
weight is illuminated
d c
, then for an accurate calculation
=.
Current values will
page: 36 of 191