h/p/cosmos 150/50 mercury Operating And Service Manual page 45

Possibilities of interfering within the cardio mode manually
Initiation: Cardio mode is selected. Running belt is moving.
Step no. Activity
[01] Alteration of speed
Alteration of the speed
automatically changes
the allowed max. speed
during cardio mode
[02] Pause mode -
Interfere with the cardio mode
[03] Alteration of elevation
[04] Changing
the max. level of heart rate
[05] Switch to the next or previous
mode
© 2012 h/p/cosmos sports & medical gmbh
Keys
a d
or
press and hold
a
f e
or
press and hold
c
and simultaneously
e f
or
c d
+
or
c a
+
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
Response / Display
=
indicates 0 ... max. speed of the machine
(for max. allowed speed during cardio mode)
Examples:
a) Set max. speed 4.0 if you want the subject to walk and
control the load by means of elevation.
b) Set max. speed 20.0 if you want the subject to control the
load by means of speed without elevation.
If speed is being reduced to 0, PAUS is displayed.
Current values will be sustained.
=
indicates PAUS, running belt stops. All displays stop.
Current values will be sustained. After restart with
displayed values will be "added".
Elevation is being increased / reduced (0-max.)
Important: Alteration of the elevation can have impact on the
heart rate of the subject and therefore can result in
compensation via automatic speed control.
is illuminated
%
indicates the max.
the min. level of heart rate is automatically changed within
the selected range.
Switch to the next or previous mode.
This is a perfect way to change the mode without stopping the
belt.
created 04.05.2012 printed 04.05.2012
operation
=.
d c
or
level of the heart rate /
page: 45 of 191
all