h/p/cosmos 150/50 mercury Operating And Service Manual page 41

Possibilities of interfering within the profile mode manually
Initiation: Profile mode is selected, running-belt is moving
Step no. Activity
[01] Alteration of speed
[02] Alteration of acceleration /
deceleration
[03] Pause mode =interfere with a
program step
[04] Alteration of elevation
[05] Switch over to the next or
previous program step
[06] Switch to the next or previous
mode
© 2012 h/p/cosmos sports & medical gmbh
Keys
a d
or
press and hold
c
press several times
and then hold
a
f e
or
press and hold
c
and simultaneous
e f
or
c d
+
or
c a
+
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
Response / Display
Speed is being increased / reduced (0 - max)
If speed is being reduced to 0, PAUS is displayed
Current values will be sustained.
Alteration of the speed is online only for this single step. The
speed can not be changed in the memory. Next program step
as defined in the profile.
Example: to select acceleration or deceleration level "3", press
the corresponding key 3 times and then hold.
(Standard value = 4, maximum 7 levels, may be limited by
optional settings)
=
indicates PAUS. Running belt stops. All displays stop.
Current values will be sustained.
d c
After restart with or all displayed values will be added.
Elevation is being increased / reduced (0-max.)
Alteration of the elevation is online only for this single step. The
elevation can not be changed in the memory. Next program
step as defined in the profile.
Jump over to the next program step, or jump to the previous
program step.
Switch to the next or previous mode.
This is a perfect way to change the mode without stopping the
belt.
created 04.05.2012 printed 04.05.2012
operation
=.
page: 41 of 191