Commissioning And Instruction Protocol - h/p/cosmos 170-190/65 Series Original Instructions Manual

17.2 Commissioning and instruction protocol

When installing the device, the h/p/cosmos service personnel instructs the intended operator according to the instructions for
use, following this instruction protocol.
With the name and signature on the commissioning and instruction protocol, the customer confirm that the installation,
commissioning and instruction has been performed correctly and instructed persons fully know how to operate the device
safely. The instructed persons confirm they are able to instruct further operators according to this protocol.
No. Information
1. These instructions for use are available on request as print version at service@hpcosmos.com. -
2. The instructions for use are to be read in full before starting with the operation.
3. The safety information is explained and understood in detail.
4. The safety information must be displayed within sight of the device.
5. The function of all safety equipment is explained in detail.
6. The use of the fall prevention system is explained in detail.
7. The position of subject and operator is explained.
8. The safety area (2 m behind device) is specifically pointed out.
9. The functions of the UserTerminal with keys, displays, programs, software and connectors are
explained in detail.
10. The general use is explained (incl. manual, profile, cardio and test mode).
11. The competences and intervals for maintenance are explained.
12. The adjustment of the running belt is explained in detail.
13. The lubrication of the device and owner's observation duties are explained in detail.
14. The accompanying documents are explained and handed over.
© 1988 - 2019 h/p/cosmos sports & medical gmbh cos105000_170-190_65, rev. 1.03
Chapter Check
-
Safety
Safety
Safety
Safety
Position of S+O
Position of S+O
UserTerminal
Operation
Maintenance
Maintenance
Maintenance
-
page 66 of 99