h/p/cosmos 150/50 mercury Operating And Service Manual page 131

Standard settings of administrator options
Option Description
OP 01 Reset of error messages E 20, E 21,
E 30, E 31, E 32, E 41, E 50 and
E 51
OP 02 OEM code
OP 03 Selection of device type:
see list of running machines types
OP 04 Maximum speed for reverse belt
rotation
OP 05 Maximum speed
OP06 Max. acceleration time in seconds
OP 07 Maximum elevation
OP 08 Heart rate display interval
OP 09 Display test for all displays
OP 10 Enter the serial number of the
device
OP 11 Activating and deactivating speed
measurement
OP 12 Setting of allowance for speed signal
comparison
(measurement / control)
OP13 Motor brake
OP 14 Maximum acceleration time for
RS232
OP 16 Activating and deactivating heart
rate measurement
OP 33 Distance between rungs (only for
ladder ergometer)
OP 34 Manual speed calibration
OP 35 Oil interval
OP 37 Interval for service message TSC
(time-dependent)
for technical safety control E.02
"HELP"
© 2012 h/p/cosmos sports & medical gmbh
Standard setting
depending on the model
depending on the model
depending on the device type
in OP03
depending on the device type
in OP03
Increment 131 = 5 sec.
depending on the device type
in OP03
0 = beat to beat
300...
depending on the device type
in OP03
6 %
This value does not reflect the
speed accuracy of the running
belt.
OFF
Increment 131 = 5 sec
(depending on the model)
254 = 25.4 cm
(depending on the device
type, OP 03)
1.000 km (treadmills)
100 km (ladder ergometer)
12 months
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
optional settings: administrator options
Adjustable range
0 = h/p/cosmos (Standard)
1 = JAEGER / VIASYS /
Cardinal Health / CareFusion
2 = Ergo-Fit (1997-98)
3 = Proxomed / Kardiomed
4 = KISTLER Gaitway
6 = COSMED
9 = SCHILLER
depending on the model
1.0 km/h .... max. speed
1.0 km/h .... max. speed
Increments: 255 ... 1
Seconds: 2.6 ... 655.4
0 .... max. elevation
0 or 1 ... 9 seconds
12-digit serial number
0 = without speed measurement
1 = with speed measurement
0 = no comparison
6 = 6 % deviation allowed
8 = 8 % deviation allowed
10 = 10 % deviation allowed
OFF = not active
ON = active
Increments: 255 ... 1
Seconds: 2.6 ... 655.4
0 = HF measurement deactivated
1 = HF measurement activated,
HFU1 + RE06REC
2 = HF measurement activated,
HFUi;
auto = autom. detection
Distance between rungs in 0.1 cm
Range from: 0 to 65535
0 = no supervision
100 ... 5.000 km
0 ... 48 month
created 04.05.2012 printed 04.05.2012 page: 131 of 191