Installation & Commissioning - h/p/cosmos 150/50 mercury Operating And Service Manual

7.4 Installation & commissioning
7.4.1 Unpacking and packaging
When receiving the machine in a crate or unpacked, make sure the machine, the accessories and/or the packaging is
not damaged. If you discover any damage and/or missing parts make a note on the packing-list / delivery note of the
carrier. Inform h/p/cosmos and your dealer immediately in writing about any damage and/or missing parts.
The manufacturer does not assume liability for any damage, complaints or missing parts which are
not reported immediately upon delivery on the packing list/delivery note.
Before unpacking the machine and accessories, read the instructions on the crate. Make sure that the machine, power
connection cable or any optional equipment will not be damaged during unpacking. Pay special attention to small parts,
so that you do not dispose of them or any instructions with the packaging. Within Germany, most devices are delivered
and assembled by h/p/cosmos directly or by an authorised forwarder. If delivered by h/p/cosmos, the packaging will be
removed and recycled.
If the running machine is delivered by a carrier, you can recycle the packaging yourself or send it back to the
manufacturer (transportation to be paid by the customer). Often a recyclable transport tool, packaging material or a
transport fuse (metal angle with screws) is included in the scope of delivery.
Ask your dealer and the carrier to take the packaging and the recyclable transport tool back to your dealer or to
h/p/cosmos at your own costs. In some cases, a credit note can be granted. Special packaging and/or carrier
constructions must not be disposed unauthorizedly.
7.4.2 Transport
Transport to upper or lower floors and through narrow doorways:
With the standard models (sizes with running surface 150/50 cm, 170/65 cm, 190/65 cm), the left handrail is easily
removed (unless it is an adjustable handrail), as there are no cables inside. The handrail at the right can be unscrewed
and turned 90° to the left ("lay it on the running belt"). Then the handrail is to be temporarily fixed with a special
transport fuse construction (available at h/p/cosmos) in order to avoid damage during transport.
Provided the right handrail is flat and temporarily fixed on
the running surface, the whole machine can be turned 90°
to the right to an upright position. This reduces the width of
the machine so that it can be easily manoeuvred through
narrow doors or windows.
A special transport tool is available to move the machine
through aisles. (See below: available on rental basis from
h/p/cosmos).
© 2012 h/p/cosmos sports & medical gmbh
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
safety, installation and commissioning
created 04.05.2012 printed 04.05.2012 page: 76 of 191