Emergency Stop, Stop Buttons And Functions And Safety Features - h/p/cosmos 150/50 mercury Operating And Service Manual

5.4

Emergency Stop, stop buttons and functions and safety features

In case of emergency, e.g. danger of stumbling and/or falling, etc., grab the front crossbar and/or both side handrails
and jump onto the foot rails (step platforms) with both feet.
The emergency stop button is to be pressed immediately!
h/p/cosmos is in compliance with the norm EN 957-6 and offers more safety features than required, as shown in the
following tables. In all below mentioned cases, all displayed values will be reset to "0".
Type of Stop
Safety Stop =
Emergency Stop
on UserTerminal
Safety Stop =
Emergency Stop
Quick Stop
models venus / saturn
Emergency stop
button is connected to
the "quick stop port"
of the UserTerminal
Quick Stop
at safety arch
© 2012 h/p/cosmos sports & medical gmbh
Function
palm switch is hit
N
running belt & inclination system stop fast
N
machine is cut off from main power of
N
drive motor and inclination system
display, keyboard and interface inactive
N
mushroom switch is hit
N
running belt & inclination system stop fast
N
machine is cut off from main power of
N
drive motor and inclination system
display, keyboard and interface inactive
N
mushroom switch is hit
N
running belt & inclination system stop
N
extremely fast
drive motor is used to stop the running belt
N
very fast
machine is NOT cut off from main power
N
of drive motor and inclination system
display active, shows "PULL STOP"
N
interface active, but no start, speed or
N
elevation signal executed
keyboard inactive
N
subject wears chest belt/harness, safety
N
rope is pulled > approx. 8 kg
running belt & inclination system stop very
N
fast
drive motor is used to stop the running belt
N
very fast on the oversize machines
venus/saturn
machine is NOT cut-off from main power
N
of drive motor and inclination system
display active & shows "PULL STOP"
N
interface active, but no start, speed or
N
elevation signal executed
keyboard inactive
N
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
Interface
communication
interrupted
during cut-off
from main power
interrupted
during cut-off
from
main power
NOT
interrupted
during
Quick Stop
stage
NOT
Interrupted
during Quick Stop
and/or
"PULL STOP"
stage
created 04.05.2012 printed 04.05.2012
operation
How to restart
wait 1 minute
N
turn palm switch
N
push "ON" button at
N
main power switch
press START key at
N
UserTerminal
or new command via
interface
wait 1 minute
N
pull mushroom
N
switch
push "ON" button at
N
main power switch
press START key at
N
UserTerminal
or new command via
interface
pull mushroom
N
switch
press START key at
N
UserTerminal
or new command via
interface
release weight from
N
safety rope
press START key at
N
User Terminal
or new command via
interface
page: 27 of 191