h/p/cosmos 150/50 mercury Operating And Service Manual page 132

OP 38 Service Interval
dependent)
"E 02" "HELP"
OP 39 Elevation: display as set point or
true value
OP 40 Speed: display as set point or true
value
OP 41 Elevation control after STOP
OP 46 Display and setting of elevation for
ladder ergometer
OP 47 Reset of oil- and service interval
OP 48 Running belt speed at maximum
frequency inverter speed
OP 49 Type of FI control
OP 51 Error statistics of the digital FI-
control
OP 89 System for elevation measurement
OP 90 Load or save default setting
OP 91 Total time of operation MCU
(incl. stand by)
OP 92 Total distance
OP 93 Total time of operation (incl. stand-
by)
OP 94 Total time of use (motor + belt)
OP 95 MCU serial number
OP 98 Setting for limitation of time of use
OP 99 Test profile 99 for endurance testing
in the factory / service
© 2012 h/p/cosmos sports & medical gmbh
(distance- 5,000 km (treadmill)
500 km (ladder ergometer)
1 (true value)
1 (true value)
0 (elevation maintains)
75 (degree)
depending on the device type,
OP 03
RS-485
n.a.
(depending on the device
type; OP 03)
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
n.a.
0 = test 99 de-activated
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
optional settings: administrator options
1,000 ... 9,999 km (treadmill)
100... 5,000 km (ladder ergometer)
0 = set point
1 = true value
0 = set point
1 = true value
0 = elevation maintains
1 = elevation gets down to 0 %
0 ... 180 degree
(depending on the device type,
OP 03) 1.00 ... 99.99 km/h
analogue, RS-485
0 to 9999 per type of error
(depending on the device type;
OP 03)
n.a.
0 ... 1.193.046 h
0 ... 4.294.976 km
0 ... 1.193.046 h
0 ... 1.193.046 h
0000 0000 to 9999 9999
n.a.
0 = test profile 99 de-activated
1 = test profile 99 activated
created 04.05.2012 printed 04.05.2012 page: 132 of 191