h/p/cosmos 150/50 mercury Operating And Service Manual page 124

OP05 Maximum speed
OP06 Maximum acceleration time in
seconds
(This option is only available for
treadmills, not for
ladderergometers).
OP07 Maximum elevation
(This option is only available for
treadmills, not for a ladder-
ergometer).
OP08 Heart rate display interval
OP09 Test of all displays and LEDs
OP10 Enter the serial number of the
device provided on the nameplate
OP11 Activating and de-activating speed
measurement
© 2012 h/p/cosmos sports & medical gmbh
The standard maximum speed of the selected device type (in
OPTION 03) will be indicated in the SPEED display.
Example: h/p/cosmos mercury 4.0 = 22.0 km/h; h-p-cosmos discovery
4.0 = 40 m/min
For safety purposes (e.g. for beginners), the max. speed of every
treadmill model can be limited.
=
adjustable range from 1 km/h to maximum treadmill speed
selected unit is blinking,
§
$
%
The standard maximum elevation of the selected device type (in
OPTION 03) will be indicated.
Example: h/p/cosmos mercury = 25 %
For safety purposes (e.g. for beginners, or in case the ceiling height
of the room's ceiling is insufficient) the max. elevation of every
treadmill model can be limited.
$
maximum treadmill elevation
§
adjustable range from 0 (beat to beat) .... 1 to 9 seconds
Compare: An original POLAR heart rate monitor has a display interval
of 5 seconds
$
Change the values with
Example: Treadmill with serial number cos30000va08-0128 on the
nameplate
§
$
%
Speed measurement is normally activated / de-activated by selecting
the correct device type (administrator option number 3). Only in very
special cases a special adjustment in option number 11 is necessary.
Speed measurement can only be activated if the device has a speed
sensor.
§
0 =
1 =
2 =
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
optional settings: administrator options
indicates: maximums speed,
max. is blinking
reports e.g. 131 (max. acceleration increment)
reports e.g. 5.0 (max. acceleration time in seconds.)
indicates: SEC.
indicates: maximum elevation, adjustable range from 0 to
indicates heart rate display interval in seconds,
indicates: SEC
a d
or , confirm the values with
indicates 300 (item number of device)
indicates: 0005 (item number of device)
indicates: 0128 (serial numbers of this device family)
indicates
without speed measurement / -sensor
with speed measurement / -sensor
(permanent control)
with speed measurement / -sensor
(control as of speed > 2 km/h, no control < 2 km/h)
created 04.05.2012 printed 04.05.2012
c
page: 124 of 191