h/p/cosmos 150/50 mercury Operating And Service Manual page 67

OP20 RS232 interface protocol: COM 1
Various ECG and ergospirometry
systems support the h/p/cosmos
coscom protocol.
adaptation of protocol on request.
For further information about the
h/p/cosmos coscom protocol see
www.coscom.org
We recommend using the
h/p/cosmos coscom v3 protocol as it
provides a high standard of safety
and functionality and is in
compliance with norm EN 62304. All
other interface protocols (other than
coscom v3) are not validated by
h/p/cosmos and not released by
h/p/cosmos based on EN 62304 and
EN 14971 and must not be used for
new installations and configurations
of medical devices and medical
applications from 21.03.2010.
h/p/cosmos para control
h/p/cosmos para graphics
exclusively work with the
h/p/cosmos coscom protocol.
For advanced h/p/cosmos coscom
v3 connections with baud rate
115200, please select OP20=20.
Please note that the connected
devices/software must be approved
for h/p/cosmos coscom v3 with baud
rate 115200 (for example
h/p/cosmos para control
OP21 RS232 interface protocol: COM 2
OP23 RS232 interface protocol COM 4
© 2012 h/p/cosmos sports & medical gmbh
§
indicates flashing: number of the RS232 interface protocol
$
and
Individual
OFF = RS232 not active / no protocol / interface deactivated
1 = h/p/cosmos coscom v1, v2, v3 with Baudrate 9600 bps
(standard setting COM 1 and COM 2)
2 = JAEGER OXYCON (up to 1995); if available use:
h/p/cosmos coscom (= 1)
3 = printer protocol (serial printer or converter required)
4 = free
5 = P... treadmill emulation (max. 12.7 km/h) (on request for fitness only)
6 = M.1; (on request for fitness)
if available use: h/p/cosmos coscom (= 1)
7 = TM treadmill emulation in km/h
if available use: h/p/cosmos coscom (= 1)
8 = TM treadmill emulation in miles per hour
if available use: h/p/cosmos coscom (= 1)
9 = custo card ECG (MS DOS-Version, not for Windows!);
if available use: h/p/cosmos coscom (= 1)
10 =
11 =
12 =
and
®
®
13 =
14 =
17 =
18 =
20 =
4.1).
®
See descriptions above
§
indicates flashing: number of the RS232 interface protocol
$
and % reports:
OFF = RS232 not active / no protocol / interface deactivated
18 = Chip-card reader PROXOMED (special hardware required)
20 = h/p/cosmos coscom v3 / Baudrate 115200 bps
22 = POLAR W:I:N:D: - System (more adjustments in user option OP19
und administrator option OP16)
file: n:\article\cos14310m5-v1_06hpc-en\20120504_cos14310m5-v1.06hpc-en_manual_h-p-cosmos_running_machine.docx
email@h-p-cosmos.com
%
reports:
Loop Back Test (special test plug required, available
at h/p/cosmos)
SunTech Tango blood pressure monitor (signal tunnel/loop only)
Remote Control Hardware Terminal MCU 4
(special hardware required)
B. T 500 treadmill emulation (on request for fitness only)
B. T 600 treadmill emulation (on request for fitness only)
Chipcard reader Ergofit (special hardware required) –
only available at MCU4 (all firmware versions)
or MCU5 firmware < v1.03.x (on request for fitness only)
Chipcard reader Proxomed (special hardware
required) – only available at MCU4 (all firmware
versions) or MCU5 firmware < v1.03.x
h/p/cosmos coscom v3 with baud rate 115200 bps
created 04.05.2012 printed 04.05.2012
operation
page: 67 of 191