[5.B3] Manual Mode - h/p/cosmos 150/50 locomotion de med Operating Instructions And Service Manual

Manual mode
[5.B3]
Initiation: Running belt is not moving. One of the modes LED ~ is flashing: (manual, profile, cardio, test)
Step no. Activity
[5.B3]
[01] Select operational mode manual
[02] Start operational mode manual
[03] Alteration of speed
[04] Alteration of acceleration and
deceleration level for speed
[05] Pause mode
[06] Alteration of elevation
© 2008 h/p/cosmos sports & medical gmbh
Keys
a
or
c
a
or
press and hold
a
or
press several times
and then hold
a
f
or
press and hold
file: n:\article\cos14310m5-v1.04hpc-en\20080901_cos14310m5-v1.04hpc-en_manual_h-p-cosmos_running_machine.doc
email@h-p-cosmos.com
Response / Display
d
Alteration of the mode (manual, profile, cardio, test) until
~
manual is flashing
A) In case of deactivation (standard) in the optional
functions:
~
manual, km/h, m and % are glowing
~ met,
energy and power are glowing by turns
Running belt accelerates up to the pre-selected starting-
speed (standard: 0.5 km/h, can be changed in the
optional mode), start of measuring
%
indicates present heart rate: P. 40 ... P. 220. The
display indicates every single heart-beat with a flashing
dot behind the P
B) In case of activation in the optional functions:
%
indicates: 65 flashing (for 65 kg body weight)
~
weight is glowing
in order to enter with a or d and then c the body
weight for an accurate calculation of the POWER and
ENERGY consumption.
Further steps see A)
d
Speed is being increased / reduced (0-max.) as long as
the key get pressed. If Speed is being reduced down to
„0"= Pause-position:
=
indicates: PAUS. Current values will be
sustained.
d
Example: For acceleration or deceleration level "3",
press 3 times the corresponding key and then hold.
Note: Maximum 7 levels, limited by the maximum
acceleration level selected in the Optional Mode /
standard value = 4.
If Speed is being reduced down to „0" = Pause position
=
indicates: "PAUS". Running belt stops. All
displays stop. Current values will be sustained.
When restart with d or c all display values will be
"added".
e
Elevation is being increased / reduced (0 ... max.) as
long as the key get pressed.
created 01.09.2008 printed 08.10.2008
operation
page: 42 of 176