Default Vlan Behavior - Dell PowerConnect 8024 User Configuration Manual

Default VLAN Behavior

One VLAN exists on the PowerConnect 8000-series and 8100-series switches
by default. The VLAN ID is 1, and all ports are included in the VLAN as
access ports, which are untagged. This means when a device connects to any
port on the switch, the port forwards the packets without inserting a VLAN
tag. If a device sends a tagged frame to a port, the frame is dropped. Since all
ports are members of this VLAN, all ports are in the same broadcast domain
and receive all broadcast and multicast traffic received on any port.
When you add a new VLAN to the VLAN database, no ports are members.
The configurable VLAN range is 2–4093. VLANs 4094 and 4095 are reserved.
Ports in trunk and access mode have the default behavior shown in Table 22-2
and cannot be configured with different tagging or ingress filtering values.
When you add a VLAN to a port in general mode, the VLAN has the behavior
shown in Table 22-6.
Table 22-6. General mode Default Settings
Feature
Frames accepted
Frames sent
Ingress Filtering
PVID
554
Configuring VLANs
Default Value
Untagged
Incoming untagged frames are classified into the VLAN
whose VLAN ID is the currently configured PVID.
Untagged
On
1