Dell PowerConnect 8024 User Configuration Manual page 274

Table 13-1. SNMP Defaults
Parameter
OSPF traps
Table 13-2 describes the two views that are defined by default.
Table 13-2. SNMP Default Views
View Name
Default
DefaultSuper
By default, three groups are defined. Table 13-3 describes the groups. The
Read, Write, and Notify values define the preconfigured views that are
associated with the groups.
Table 13-3. SNMP Default Groups
Group Name
DefaultRead
DefaultWrite
DefaultSuper
274
Configuring SNMP
OID Subtree
iso
snmpVacmMIB
usmUser
snmpCommunityTable
iso
Security Level
No Auth No Priv
No Auth No Priv
No Auth No Priv
Default Value
Disabled
Read Write
Default –
Default Default
DefaultSuper DefaultSuper
View Type
Included
Excluded
Excluded
Excluded
Included
Notify
Default
Default
DefaultSuper