Viewing Statistics - Dell PowerConnect 8024 User Configuration Manual

Command
rmon collection history
index
[owner
ownername
] [buckets
bucket-number
seconds
[interval
CTRL + Z
show rmon {alarms
|collection history |
events | history | log |
statistics}

Viewing Statistics

Use the following commands in Privileged EXEC mode to view statistics
about the traffic handled by the switch.
Command
show interfaces counters
if_type if_number
[
interface
port-channel
show statistics
interface
{switchport |
show gvrp statistics
interface
382
Monitoring Switch Traffic
Purpose
Enable an RMON MIB history statistics group on the
interface.
NOTE:
You must configure RMON alarms and events before
]
RMON collection history is able to display.
]
index
•
1–65535)
ownername
•
name. If unspecified, the name is an empty string.
bucket-number
•
buckets specified for the RMON collection history group
of statistics. If unspecified, defaults to 50.
(Range: 1 - 65535)
s econds
•
If unspecified, defaults to 1800. (Range: 1–3600)
Exit to Privileged EXEC mode.
View information collected by the RMON probe.
Purpose
Display the number of octets and packets handled by all
| interfaces or the specified interface.
]
Display detailed statistics for a specific port or LAG, or for
}
the entire switch. The
interface type and number.
Displays GVRP statistics for the specified port or LAG.
— The requested statistics index group. (Range:
— Records the RMON statistics group owner
— A value associated with the number of
— The number of seconds in each polling cycle.
interface
variable includes the